Wednesday, December 17, 2008

Knitting Tips

This is going to be an on-going post, I hope, as I clear out my Yahoo email of all the 'some day I'll need that info' emails.

If you want, or have to, double yarns, or want to run two yarns together add the stitch gauge of each and divide by three. Why three? I have no knittin' idea!Example: Yarn 1 =6 st per inch. Yarn 2, = 8 stitches per inch. 6 plus 8 equals 14. Divide 14 by three equals 4.67 st. per inch. I'd round it out at 4.5. Remember this is only a guestimation. Try it and see if it works.

I always convert drop sleeves to set-in sleeves.Here's how I learned:Front:First row: bind off 1" of stitches.After this, count the remaining stitches to decrease and divide into thirds.For the first 1/3 of stitches: decrease 2 stitches every row.For the next 1/3 of stitches: decrease 1 stitch every row.For the last 1/3 of stitches: decrease 1 stitch every other row.The last stitch should be decreased after three rows.Back:First row: bind off 1" of stitches.After this, count the remaining stitches to decrease and divide into thirds.For the first 1/4 of stitches: decrease 2 stitches every row.For the next 1/2 of stitches: decrease 1 stitch every row.For the last 1/4 of stitches: decrease 1 stitch every other row.The last stitch should be decreased after three rows.

For those interested, here is a blog that compared three different methods of short rows:http://nonaknits.typepad.com/nonaknits/2005/04/back_to_short_r.htmlhttp://nonaknits.typepad.com/nonaknits/2005/04/yarn_over_short.htmlhttp://nonaknits.typepad.com/nonaknits/2005/04/wrapped_stitch_.htmlhttp://nonaknits.%20typepad.com/%20nonaknits/%202005/04/japanese%20_short_.html
.com/

1 comment:

FiberGeek said...

I would like to know how you calculate the shape of the top of your sleeve once you have converted a drop shoulder to set in.

I also hate drop shoulders. I have seen the 1/3 rule you use written up someplace but I am not sure where. Do you have a reference about this?